Tied On With Rope

Tied On With Rope

Graeme Christie | Tuesday, 17 November 2026

Weather first. I spent the week looking at the swell map and it kept giving the same answer. Sunday. So the plan was Sunday out on the harbour, and I persuaded my son to come with me. He was keen, which helps.

We set up for the big migratory ones. After last week's nought from two there was new backing on the reel and the drag was set right.

The high tide was about 12.30. The plan was to be out about 9.30 and fish the rising tide, looking for fish. We hit the places where we know they sit. Nothing. We kept going and tried several more spots. Nothing. On the high we went up to another area further out. Beautiful weather, minimal swell, nice sun. Still nothing.

We kept looking. There wasn't much happening. A few more spots, and eventually a fish sitting on one of them. My son got it to follow a few times with the fly rod and the piper flies. It didn't take.

One follow for the day.

In the middle of all that we had a bit of an incident. The bow-mounted electric motor came loose while we were motoring along under significant power. It fell into the water and almost came off its mount at the front altogether. We tied it back on with some rope and carried on fishing with it, carefully. So that was a bit of a lesson. It needs a better way of being held while we're motoring along.

I've been thinking about that day since. There had been a little bit of publicity on the local fishing sites about the fish being out and about, and I wonder if someone had hit the same spots early that morning. I wouldn't be surprised. A few days of pressure and the fish get put down, or move on. Alternatively it was the time of day. There are times when they just seem to sleep more, or rest, and maybe we fished through one of those. That's two maybes and one follow. Just one of those things. A storm is coming in this week which gives everyone a rest!

I should have taken some photos. I didn't. I do have photos of the bow mount, because that is now repaired. New bolts, and a reinforcing plate underneath the mounting side. The plate is 3mm aluminium. It took a bit of fiddling. Stainless steel bolts are always fiddly to work with. Get it wrong when you're tightening them and you either shear them off or lock the nut onto the bolt. That happened to me a few times. So be prepared with a Dremel and a cutting disc if you need to get one off.

I hope all is well with everyone, with fishing and casting happening. All the best to Paul for his IM coming up. I'm looking forward to hearing how it goes!

Tight lines to you all.